All you need is the computer and software

Gary Johnston · **Voice Talent** Joined: 19 Aug 2006 Posts: 57

Everything else you need to get started is included in this bundle.

Start with the Tascam US428 DAW control surface. http://www.tascam.com/Products/US-428.html
Add a pre-amp http://www.m-audio.com/products/en_us/AudioBuddy-main.html
Then a microphone http://www.apexelectronics.com/index.php?tmp=4&id=76
Throw in a 20' XLR cable, a 6 foot 1/4 inch patch cable and even the USB cable and you're ready to plug it in out of the box.

With Cool Edit and Audition the 428 directly interfaces so it gives that "hands-on" feel and control. I used it right in the booth to control the software - it is the only way to go. Let me be clear there is no software included in the bundle.

I'm only parting with this as I've made the plunge and have a new interface (Tascam FW 1884) arriving any day along with a TLM 103. Can you see the eagerness in my words Smile

I'd be willing to wrap it all up into a nice little package for $200, plus shipping.

Ask a question?

James Beery · **Voice Talent** Joined: 08 Jun 2007 Posts: 55

[quote="Gary Johnston"]Everything else you need to get started is included in this bundle.

Do you still have the equipment.. or did I write you already?

My best to you and your new equipment!

Jim

Gary Johnston · **Voice Talent** Joined: 19 Aug 2006 Posts: 57

Jim,

Sorry to tell you that it's gone! I took a bit of time to let the new gear settle in - and to be sure it all worked - but that's done and I'll be sending the bundle off tomorrow.